To avoid resonance, reduce vibration, improve machining surface quality, and increase tool life,five edges are slightly unevenly distributed along the circumference.
Using the PSC (AlTiCrSiN) new special coating effectively avoids tool adhesion during machining and improves tool durability.
Ideal for medium to large batch production
Recommended application ：
| Material Group | Hardness | Compatibility |
|---|---|---|
| Carbon steels / Alloy steels / Prehardened steels / Tool steels | ~40 HRC | ■ |
| ~45 HRC | ■ | |
| ~55 HRC | □ | |
| ~60 HRC | ■ | |
| Prehardened steels / Hardened steels | ~65 HRC | ■ |
| Stainless steels | ~35 HRC | ■ |
| Cast Iron / Ductile cast iron | ~350 HB | |
| Copper alloys | ||
| Aluminium alloys | ||
| Graphite | ||
| Titanium alloys | □ | |
| Heat resistant alloys | □ | |
| Plastic |
PSC (AlTiCrSiN) new special coating.
A five-edge design, specifically engineered for processing difficult-to-machine materials, adopts a slightly non-uniform distribution along the circumference to avoid resonance, enhance machining surface quality, and increase tool life.
Ultrafine particle cemented carbide .
Great toughness,sharp edges,Provideeasy
cutting.
Outstanding chip control by excellent
geometric angle and edge design.
Solid Carbide End Mill MSE Specifications
| Specification | Rounded corner R | Cutting diameter D | Cutting length L1 | Overall length L | Shank diameter d | Number of cutting edges |
|---|---|---|---|---|---|---|
| D2-5-50-D4-5F MSE | - | 2 | 5 | 50 | 4 | 5 |
| D2-5-75-D4-5F MSE | - | 2 | 5 | 75 | 4 | 5 |
| D3-8-50-D4-5F MSE | - | 3 | 8 | 50 | 4 | 5 |
| D3-8-75-D4-5F MSE | - | 3 | 8 | 75 | 4 | 5 |
| D4-10-50-5F MSE | - | 4 | 10 | 50 | 4 | 5 |
| D4-10-75-5F MSE | - | 4 | 10 | 75 | 4 | 5 |
| D6-15-50-5F MSE | - | 6 | 15 | 50 | 6 | 5 |
| D6-15-75-5F MSE | - | 6 | 15 | 75 | 6 | 5 |
| D8-20-60-5F MSE | - | 8 | 20 | 60 | 8 | 5 |
| D8-20-75-5F MSE | - | 8 | 20 | 75 | 8 | 5 |
| D10-25-75-5F MSE | - | 10 | 25 | 75 | 10 | 5 |
| D10-25-100-5F MSE | - | 10 | 25 | 100 | 10 | 5 |
| D12-30-75-5F MSE | - | 12 | 30 | 75 | 12 | 5 |
| D12-30-100-5F MSE | - | 12 | 30 | 100 | 12 | 5 |
| D16-40-100-5F MSE | - | 16 | 40 | 100 | 16 | 5 |
| D16-40-150-5F MSE | - | 16 | 40 | 150 | 16 | 5 |
| D20-50-100-5F MSE | - | 20 | 50 | 100 | 20 | 5 |
| D20-50-150-5F MSE | - | 20 | 50 | 150 | 20 | 5 |
PSC (AlTiCrSiN) new special coating.
A five-edge design, specifically engineered for processing difficult-to-machine materials, adopts a slightly non-uniform distribution along the circumference to avoid resonance, enhance machining surface quality, and increase tool life.
Ultrafine particle cemented carbide .
Great toughness,sharp edges,Provideeasy
cutting.
Outstanding chip control by excellent
geometric angle and edge design
Solid Carbide Round End Mill MNR Specifications
| Specification | Rounded corner R | Cutting diameter D | Cutting length L1 | Overall length L | Shank diameter d | Number of cutting edges |
|---|---|---|---|---|---|---|
| D4R0.5-10-50-5F MSR | 0.5 | 4 | 10 | 50 | 4 | 5 |
| D4R0.5-10-75-5F MSR | 0.5 | 4 | 10 | 75 | 4 | 5 |
| D4R1-10-50-5F MSR | 1 | 4 | 10 | 50 | 4 | 5 |
| D4R1-10-75-5F MSR | 1 | 4 | 10 | 75 | 4 | 5 |
| D6R0.5-15-50-5F MSR | 0.5 | 6 | 15 | 50 | 6 | 5 |
| D6R0.5-15-75-5F MSR | 0.5 | 6 | 15 | 75 | 6 | 5 |
| D6R1-15-50-5F MSR | 1 | 6 | 15 | 50 | 6 | 5 |
| D6R1-15-75-5F MSR | 1 | 6 | 15 | 75 | 6 | 5 |
| D8R0.5-20-60-5F MSR | 0.5 | 8 | 20 | 60 | 8 | 5 |
| D8R0.5-20-75-5F MSR | 0.5 | 8 | 20 | 75 | 8 | 5 |
| D8R1-20-60-5F MSR | 1 | 8 | 20 | 60 | 8 | 5 |
| D8R1-20-75-5F MSR | 1 | 8 | 20 | 75 | 8 | 5 |
| D8R2-20-60-5F MSR | 2 | 8 | 20 | 60 | 8 | 5 |
| D8R2-20-75-5F MSR | 2 | 8 | 20 | 75 | 8 | 5 |
| D10R0.5-25-75-5F MSR | 0.5 | 10 | 25 | 75 | 10 | 5 |
| D10R0.5-25-100-5F MS | 0.5 | 10 | 25 | 100 | 10 | 5 |
| D10R1-25-75-5F MSR | 1 | 10 | 25 | 75 | 10 | 5 |
| D10R1-25-100-5F MSR | 1 | 10 | 25 | 100 | 10 | 5 |
| D10R2-25-75-5F MSR | 2 | 10 | 25 | 75 | 10 | 5 |
| D10R2-25-100-5F MSR | 2 | 10 | 25 | 100 | 10 | 5 |
| D12R0.5-30-75-5F MSR | 0.5 | 12 | 30 | 75 | 12 | 5 |
| D12R0.5-30-100-5F MS | 0.5 | 12 | 30 | 100 | 12 | 5 |
| D12R1-30-75-5F MSR | 1 | 12 | 30 | 75 | 12 | 5 |
| D12R1-30-100-5F MSR | 1 | 12 | 30 | 100 | 12 | 5 |
| D12R2-30-75-5F MSR | 2 | 12 | 30 | 75 | 12 | 5 |
| D12R2-30-100-5F MSR | 2 | 12 | 30 | 100 | 12 | 5 |
| D12R3-30-75-5F MSR | 3 | 12 | 30 | 75 | 12 | 5 |
| D12R3-30-100-5F MSR | 3 | 12 | 30 | 100 | 12 | 5 |
| D16R1-40-100-5F MSR | 1 | 16 | 40 | 100 | 16 | 5 |
| D16R1-40-150-5F MSR | 1 | 16 | 40 | 150 | 16 | 5 |
| D16R2-40-100-5F MSR | 2 | 16 | 40 | 100 | 16 | 5 |
| D16R2-40-150-5F MSR | 2 | 16 | 40 | 150 | 16 | 5 |
PSC (AlTiCrSiN) new special coating.
Ultrafine particle cemented carbide.
Great toughness,sharp edges,Provide easy cutting and perfect surface,Suitable for finishing with light cutting.
The design of high rigidity section and tip with 40° strong spiral angle.
A four-edge design (>3mm) improves machining surface quality and extends tool life.
Solid Carbide Round End Mill MSB Specifications (≤3mm)
| Specification | Rounded corner R | Cutting diameter D | Cutting length L1 | Overall length L | Shank diameter d | Number of cutting edges |
|---|---|---|---|---|---|---|
| D3R1-4-50-D4-2F MSB | 1 | 2 | 4 | 50 | 4 | 2 |
| D2R1-4-75-D4-2F MSB | 1 | 2 | 4 | 75 | 4 | 2 |
| D3R1.5-6-50-D4-2F MSB | 1.5 | 3 | 6 | 50 | 4 | 2 |
| D3R1.5-6-75-D4-2F MSB | 1.5 | 3 | 6 | 75 | 4 | 2 |
| Specification | Rounded corner R | Cutting diameter D | Cutting length L1 | Overall length L | Shank diameter d | Number of cutting edges |
|---|---|---|---|---|---|---|
| D4R2-8-50-4F MSB | 2 | 4 | 8 | 50 | 4 | 4 |
| D4R2-8-75-4F MSB | 2 | 4 | 8 | 75 | 4 | 4 |
| D6R3-12-50-4F MSB | 3 | 6 | 12 | 50 | 6 | 4 |
| D6R3-12-75-4F MSB | 3 | 6 | 12 | 75 | 6 | 4 |
| D8R4-16-60-4F MSB | 4 | 8 | 16 | 60 | 8 | 4 |
| D8R4-16-75-4F MSB | 4 | 8 | 16 | 75 | 8 | 4 |
| D10R5-20-75-4F MSB | 5 | 10 | 20 | 75 | 10 | 4 |
| D10R5-20-100-4F MSB | 5 | 10 | 20 | 100 | 10 | 4 |
high temperature alloy,titanium alloy——Side milling
| Workpiece material | Cutting output (mm) | Vc (m/min) | Cutting diameter (mm) | 1 | 2 | 3 | 4 | 6 | 8 | 10 | 12 | 16 | 20 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 High temperature alloy / titanium alloy | ap≤0.8D | 20-50 | Rotate speed (r/min) | 9500 | 4750 | 3150 | 2350 | 1550 | 1200 | 950 | 800 | 600 | 500 |
| High temperature alloy / titanium alloy | ae≤0.05D | 20-50 | Feed speed (mm/min) | 380 | 280 | 190 | 190 | 130 | 140 | 115 | 110 | 95 | 95 |
high temperature alloy,titanium alloy —— Slot mill.
| Workpiece material | Cutting output (mm) | Vc (m/min) | Cutting diameter (mm) | 1 | 2 | 3 | 4 | 6 | 8 | 10 | 12 | 16 | 20 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| High temperature alloy / titanium alloy | ap≤0.8D | 20-50 | Rotate speed (r/min) | 9500 | 4750 | 3150 | 2350 | 1550 | 1200 | 950 | 800 | 600 | 500 |
| High temperature alloy / titanium alloy | ae≤0.05D | 20-50 | Feed speed (mm/min) | 300 | 220 | 150 | 150 | 100 | 110 | 90 | 90 | 75 | 75 |
high temperature alloy,titanium alloy —— Profiling milling
| Workpiece material | Cutting output (mm) | Vc (m/min) | Cutting diameter (mm) | 1 | 2 | 3 | 4 | 6 | 8 | 10 | 12 | 16 | 20 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| High temperature alloy / titanium alloy | ap≤0.8D | 20-50 | Rotate speed (r/min) | 9500 | 4750 | 3150 | 2350 | 1550 | 1200 | 950 | 800 | 600 | 500 |
| High temperature alloy / titanium alloy | ae≤0.05D | 20-50 | Feed speed (mm/min) | 300 | 220 | 150 | 150 | 100 | 110 | 90 | 90 | 75 | 75 |
for heat-resisting alloys
Carbide End Mills MS
for heat-resisting alloys
